MDT Premier Tactical Picatinny Scope Rings
MDT Premier Scope Rings offer a solid mounting system for your optics. Made from precision machined aluminium, these rings are available for the majority of scope sizes and required heights.
Each pack contains a pair of 2 rings.
Note: Torque settings for the ring caps are 15-20 in.lbs, rail clamps are 30 in.lbs
- CMM checked to 1.5 millionths of an inch precision.
- Machined from Billet 6061 Aluminum.
- Four oversized #8-32 Grade 8 fasteners used for clamping the scope
- Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
- Made in Canada
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails:
By contrast, US MIL-STD-1913 spec mounts attach only to the angles sides of the rail, leaving a small gap between the top of the rail and the underside of the mount, and significantly reducing the amount of contact area between the mount and rail:
Testing performed by NATO has shown that the STANAG attachment method increases the robustness of the interface, leading to increased alignment repeatability. MDT Premier Scope rings can be mounted to scope base rails designed to both the STANAG and MIL-STD specifications.
Available in three diameters; 25.4mm (1"), 30mm and 34mm.
And four heights - Heights are measured from the centre of the scope tube to the top of the picatinny rail: Low: 20.8mm (0.820"), Medium: 25.4mm (1.000”), High: 31.8mm (1.250”), Extra-High: 38.1mm (1.500”)
- 1” inch Scope Tube, Low Height (0.820”)
- 1” inch Scope Tube, Medium Height (1.00”)
- 1” inch Scope Tube, High Height (1.25”)
- 1” inch Scope Tube, Extra High Height (1.5”)
- 30mm Scope Tube, Low Height (0.820”)
- 30mm Scope Tube, Medium Height (1.00”)
- 30mm Scope Tube, High Height (1.25”)
- 30mm Scope Tube, Extra High Height (1.5”)
- 34mm Scope Tube, Medium Height (1.00”)
- 34mm Scope Tube, High Height (1.25”)
- 34mm Scope Tube, Extra High Height (1.5”)
ATP is an authorised Australian dealer for MDT. All MDT products bought from ATP are covered by the Australian MDT Warranty.
We Also Recommend