Menu
Cart

MDT Elite Tactical Picatinny Scope Rings with Integral Anti Cant Bubble Level

MDT

  • $27500


MDT Elite Scope Rings offer a solid, lightweight mounting system for your optics, designed for ultimate precision and strength. Machined from Billet 7075-T651 Aluminum – 1/3 the weight of steel with similar strength. Built-in bubble level on medium, high, and extra-high rings (Note: No bubble level on low rings)

Each pack contains a pair of 2 rings.

  • Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
  • Six oversized #8-32 Grade 8 fasteners used for clamping the scope
  • Sleek curves blend well into most scopes
  • 25mm (0.984”) of lateral contact with scope tube
  • 30mm (1.181”) of lateral contact with mounting rail
  • The main body is machined on an automated seven-axis, high-end CNC machine tool.
  • Extra wide profile provides extremely stable mounting
  • The bottom rail interface is machined at the same time as the scope clamp interface, guaranteeing all rings are square and parallel.
  • CMM checked to 1.5 millionths of an inch precision.
  • Extra thick clamp system will never bend, fatigue, or become loose with use.
  • Made in Canada

MDT Precision Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”.  This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface.  This design also allows mounting on out-of-spec rails.

By contrast, US MIL-STD-1913 spec mounts attach only to the angles sides of the rail, leaving a small gap between the top of the rail and the underside of the mount, and significantly reducing the amount of contact area between the mount and rail.

Testing performed by NATO has shown that the STANAG attachment method increases the robustness of the interface, leading to increased alignment repeatability.  MDT Elite Precision Scope rings can be mounted to scope base rails designed to both the STANAG and MIL-STD specifications.

 

Available in four diameters to suit scopes with the following tube diameters; 25.4mm (1"), 30mm, 34mm and 35mm (Note: The 1” diameter rings use aluminium inserts to reduce the bore diameter of the 30mm rings to 1”)

And four heights - Heights are measured from the centre of the scope tube to the top of the picatinny rail: Low: 20.8mm (0.820"), Medium: 25.4mm (1.000”), High: 31.8mm (1.250”), Extra-High: 38.1mm (1.500”) NOTE: No bubble level on low rings.

Available in: 

  • 1 inch scope tubes, Medium Height, Matte Black, 25.4mm (1.000”)
  • 1 inch scope tubes, High Height, Matte Black, 31.8mm (1.250”)
  • 1 inch scope tubes, Extra High Height, Matte Black,  38.1mm (1.500”) 
  • 30mm scope tubes, Low Height, Matte Black, 20.8mm (0.820")
  • 30mm scope tubes, Medium Height, Matte Black, 25.4mm (1.000”)
  • 30mm scope tubes, High Height, Matte Black, 31.8mm (1.250”)
  • 30mm scope tubes, Extra High Height, Matte Black,  38.1mm (1.500”) 
  • 34mm scope tubes, Medium Height, Matte Black, 25.4mm (1.000”)
  • 34mm scope tubes, High Height, Matte Black, 31.8mm (1.250”)
  • 34mm scope tubes, Extra High Height, Matte Black,  38.1mm (1.500”) 
  • 35mm scope tubes, Medium Height, Matte Black, 25.4mm (1.000”)
  • 35mm scope tubes, High Height, Matte Black, 31.8mm (1.250”)
  • 35mm scope tubes, Extra High Height, Matte Black,  38.1mm (1.500”) 

 

ATP is an authorised Australian dealer for MDT. All MDT products bought from ATP are covered by the Australian MDT Warranty.


We Also Recommend