Menu
Cart

EGW Steel HD Heavy Duty Tactical Picatinny Weaver Scope Mount Rail Base

EGW

  • $18995


EGW Steel HD rails are made of 4140 Carbon Steel which is Mil-spec parkerized for a durable rust resistant finish.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The cross slots are also machined the full width of the mount and gauged to MIL-STD 1913 specs maintaining tolerances of +/-.002".

  • This mount is available with a 0 or 20 MOA (for most models) 
  • Torx screws and wrench included
  • This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 
  • Made in the USA
  • 4140 Carbon Steel with a Mil-spec parkerized finish (Black)

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

Notes:

REMINGTON: The rails to fit Remington 700 will NOT fit the Howa 1500/ Weatherby Vanguard.

BROWNING: There have been issues with Browning firearms being chambered for a certain action length and having a different length action. Eg: X-Bolt 22-250 in a WSSM action. Please make sure the scope mount you are selecting has the correct centre spread before purchasing. Browning calls their WSSM guns SSA.

SAVAGE: Most Savage receivers are drilled from the factory for #6 screws. The diameter of #6 screws is .13" while the diameter of #8 screws is .16". You can measure the screw diameter in the receiver to see which size you need. All of our mounts come with #6 screws with some exceptions where #8 screws are specified. 

Savage rifles manufactured after the early 2000's have a receiver with a round front and rear. These will work with our "Round Back Mounts". Savage rifles manufactured prior to the early 2000's have a receiver with a round front and a flat rear. We call these our "Flat Back Mounts". 

Round back (receiver) actions have two action lengths. Short or Long action. Previously, a 110, 112, 114, 116 series rifle denoted a long action and a 10, 12, 14, 16 denoted a short action. Savage has since changed their numbering system. We recommend measuring your center spread if you aren't 100% sure which action length you have. 

SPRINGFIELD: Uses the 03A3/03A4 2 screw hole pattern. Engages back of dovetail for a recoil shoulder.

 

Available for the following:

#86000: Remington 700, 722 and 40x Short Action - Steel HD - 0 MOA - Black (Center Spread: 3.627")

#86002: Remington 700, 722 and 40x Short Action - Steel HD - 20 MOA - Black (Center Spread: 3.627")

#86100: Remington 700, 721, 725 Long Action - Steel HD - 0 MOA - Black (Center Spread: 4.485")

#86102: Remington 700, 721, 725 Long Action - Steel HD - 20 MOA - Black (Center Spread: 4.485")

#86120: Springfield 03A3/03A4 - Steel HD - Black

#86200: Savage Round Back Short Action - Steel HD - 0 MOA - Black (Center Spread: 3.93")

#86202: Savage Round Back Short Action - Steel HD - 20 MOA - Black (Center Spread: 3.93")

#86300: Savage Round Back Long Action - Steel HD - 0 MOA - Black (Center Spread: 4.63")

#86302: Savage Round Back Long Action - Steel HD - 20 MOA - Black (Center Spread: 4.63")

#86400: Howa 1500 and Weatherby Vanguard Short Action - Steel HD - 0 MOA - Black (Center Spread: 3.886")

#86402: Howa 1500 and Weatherby Vanguard Short Action - Steel HD - 20 MOA - Black (Center Spread: 3.886")

#86600: Browning X-Bolt Short Action - Steel HD - 0 MOA (Center Spread: 2.94")

#86602: Browning X-Bolt Short Action - Steel HD - 20 MOA (Center Spread: 2.94")

 

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW's Australian Warranty.


We Also Recommend