Menu
Cart

EGW Lightweight Tactical Picatinny Scope Mount Rail Base - Winchester

EGW

  • $6995


To fit Winchester firearms, please see our other listings for EGW rails to fit other manufacturers.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

  • This mount is available with a 0 or 20 MOA (for most models) 
  • Mounting screws and allen wrench included
  • This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. 
  • Made in the USA
  • 6061 T6 Aircraft Grade Aluminium
  • Most models available in Silver (SIL) or Black (BLK). Black models are Type 2 Anodized

Installation: EGW recommends 20 inch lbs of torque and a drop of blue loctite

*The center spread is the distance between the two middle holes, center to center, on your receiver.

Notes:

ALL RAILS: You must check your center spread before ordering to make sure this rail will fit your application before ordering as the Winchester Model 70 have had numerous action spacings over the years.

MODEL 70 STD/LA RAILS: These rails will also fit the Marlin XL7, XS7, although you must measure your center spread before ordering.

MODEL 70 H&H RAILS: Check the distance between the centres of the rear 2 screws on your action, as there are three versions to fit rifles with 0.325", 0.375" or 0.437" rear spacing.

MODEL 70 (FN MANUFACTURED): This scope mount has the same dimensions as the Winchester WSM but is drilled for #8-40 screws and is specifically made for the FN Manufactured Version.

XPR RAILS: This mount is designed specifically for the XPR receiver. It will NOT fit any other model 70.

WINCHESTER 1300 RAILS: When installing, tighten rear screw last. This mount will also fit the SXP.

WINCHESTER 88, 100 RAILS: Will also fit the Sako Finnwolf, measure center spread before ordering.

WINCHESTER 52 TARGET, ANSCHUTZ 64, KIMBER 82C and 82G RAILS: This mount is made specifically for the Winchester 52 and mounts to the barrel, not the receiver, you will need to remove the barrel blocks in order to install this mount, although it does fit on a Kimber 82C, 82G, H&R 12, Winchester 75, as well as Remington 37.

This mount is available in 0, 20 and Negative 20 MOA.

If your Winchester has a TAPERED BARREL (very front of the barrel measures less than .750" , you will need a negative 20 MOA. The tapered barrel automatically gives you a 20 MOA, the negative will bring you back to 0 MOA. 

 

Available for the following:

#42000: Winchester Model 70 Short Action - 0 MOA - Black (Center Spread: 3.259")

#42002: Winchester Model 70 Short Action - 20 MOA - Black (Center Spread: 3.259")

#42100: Winchester Model 70 Standard / Long Action (also fits Marlin XL7, XS7) - 0 MOA - Black (Center Spread: 3.805")

#42102: Winchester Model 70 Standard / Long Action (also fits Marlin XL7, XS7) - 20 MOA - Black (Center Spread: 3.805")

#42200: Winchester Model 70 WSM Action - 0 MOA - Black (Center Spread: 3.514")

#42202: Winchester Model 70 WSM Action - 20 MOA - Black (Center Spread: 3.514")

#42300: Winchester Model 70 WSSM Action - 0 MOA - Black (Center Spread: 3.225")

#42302: Winchester Model 70 WSSM Action - 20 MOA - Black (Center Spread: 3.225")

#42400: Winchester Model 70 H&H Action (0.325 Rear Screw Spacing) - 0 MOA - Black (Center Spread: 4.343")

#42401: Winchester Model 70 H&H Action (0.375 Rear Screw Spacing) - 0 MOA - Black (Center Spread: 4.293")

#42402: Winchester Model 70 H&H Action (0.437 Rear Screw Spacing) - 0 MOA - Black (Center Spread: 4.231")

#42403: Winchester Model 70 H&H Action (0.325 Rear Screw Spacing) - 20 MOA - Black (Center Spread: 4.343")

#42404: Winchester Model 70 H&H Action (0.375 Rear Screw Spacing) - 20 MOA - Black (Center Spread: 4.293")

#42405: Winchester Model 70 H&H Action (0.437 Rear Screw Spacing) - 20 MOA - Black (Center Spread: 4.231")

#42500: Winchester 1300 - 0 MOA - Black (Center Spread: 2.49")

#42600: Winchester XPR (it will NOT fit any other Model 70 Long Action - 0 MOA - Black (Center Spread: 3.862")

#42602: Winchester XPR (it will NOT fit any other Model 70) Long Action - 20 MOA - Black (Center Spread: 3.862")

#42603: Winchester XPR (it will NOT fit any other Model 70) Short Action - 0 MOA - Black (Center Spread: 3.340")

#42604: Winchester XPR (it will NOT fit any other Model 70) Short Action - 20 MOA - Black (Center Spread: 3.340")

#42700: Winchester 52 Target, Anschutz 64, Remington 37, Kimber 82C and 82G (Mounts to barrel not receiver) - 0 MOA - Black

#42701: Winchester 52 Target, Anschutz 64, Remington 37, Kimber 82C and 82G (Mounts to barrel not receiver) - Negative 20 MOA - Black

#42702: Winchester 52 Target, Anschutz 64, Remington 37, Kimber 82C and 82G (Mounts to barrel not receiver) - 20 MOA - Black

#42800: Winchester 88, 100 (also fits Sako Finnwolf) - 0 MOA - Black (Center Spread: 2.45")

#42802: Winchester 88, 100 (also fits Sako Finnwolf) - 20 MOA - Black (Center Spread: 2.45")

#42902: Winchester Model 70 (FN Manufactured Version with #8-40 screws) - 20 MOA - Black (Center Spread: 3.52")

 

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW's Australian Warranty.

 


We Also Recommend