EGW Lightweight Tactical Picatinny Scope Mount Rail Base – Savage

$59.95$109.95 inc. GST

SKU: N/A Category: Brand:

To fit Savage firearms, please see our other listings for EGW rails to fit other manufacturers.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

  • This mount is available with a 0 or 20 MOA (for most models)
  • Mounting screws and allen wrench included
  • This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
  • Made in the USA
  • 6061 T6 Aircraft Grade Aluminium
  • Most models available in Silver (SIL) or Black (BLK). Black models are Type 2 Anodized

Installation: EGW recommends 20 inch lbs of torque and a drop of blue loctite

NOTE: If you prefer to buy Australian Made, we also manufacture our own scope rails for the Savage 93/MkII. Available at the following link: https://australiantacticalprecision.com.au/shop/optics/scope-bases-and-rails/?filtering=1&filter_product_brand=1705

Notes:

ALL SAVAGE RAILS: Most Savage receivers are drilled from the factory for #6 screws. The diameter of #6 screws is .13″ while the diameter of #8 screws is .16″. You can measure the screw diameter in the receiver to see which size you need. All of our mounts come with #6 screws with some exceptions where #8 screws are specified. 

Savage rifles manufactured after the early 2000’s have a receiver with a round front and rear. These will work with our “Round Back Mounts”. Savage rifles manufactured prior to the early 2000’s have a receiver with a round front and a flat rear. We call these our “Flat Back Mounts”. 

Round back (receiver) actions have two action lengths. Short or Long action. Previously, a 110, 112, 114, 116 series rifle denoted a long action and a 10, 12, 14, 16 denoted a short action. Savage has since changed their numbering system. Flat back (receiver) actions have three possible action lengths. We recommend measuring your center spread if you aren’t 100% sure which action length you have. 

SAVAGE 93 AND MKII RAILS: The bolt pattern for the Savage 93 rail works for Savage 93 and newer Mark II rifles. The difference between these mounts is the size of the ejection port. If your gun is an older production Mark II, it will have a 1-3/8 ejection port. New production Mark II rifles have a 1-5/8″ ejection port and require the use of our Savage 93 mount. 

Savage 93 mount – 1/-5/8″ ejection port *If your gun is a Savage 93, it will have a 1-5/8″ ejection port. 

Savage MK II mount – 1-3/8″ ejection port The Savage MK II mount will also fit the Savage MK I.

Please measure the size of your ejection port prior to ordering to ensure the right fit.

F-CLASS EXTENDED RAILS: These are available in two variants, choose the “with Ejection Port” version for repeaters. The “Single Load” version does not have an ejection port cut into the rail. 

SAVAGE 42 and 42T RAIL: Savage references Part #41942, however Part #41950 is the part number that you need for the 42 and 42T.

SAVAGE 64 RAIL: These rails are drilled for and include #6 screws, you must drill and tap your receiver to fit these rails.

SAVAGE B MAG RAILS: This scope mount DOES have an ejection port cut out on the right side of the mount (not shown in the photo). This mount IS NOT ambidextrous, so will not fit left handed rifles.

SAVAGE A22 22LR 41983: This mount fits Savage A22 LR (Pre 3380376 Serial Number)
*Please confirm the hole spacing on your receiver or your serial number. Savage is now manufacturing A22 that utilize the same spacing as the A17 mount that we manufacture.

SAVAGE A17, A22 Magnum 41980/41982: This mount fits: Savage A17, Savage A22 Mag, Savage A22 LR* (Post 3380376 Serial Number)
*Savage is now manufacturing A22s with the same hole spacing as the A17. Please confirm the hole spacing on your receiver. Models with serial numbers Pre 3380376 utilize the A22 22LR mount (41983).

*The center spread is the distance between the two middle holes, center to center, on your receiver.

Available for the following:

#41000: Savage Round Back Short Action – 0 MOA – Black (Center Spread: 3.93″)

#41002: Savage Round Back Short Action – 20 MOA – Black (Center Spread: 3.93″)

#41010: Savage Round Back Short Action – 0 MOA – Silver (Center Spread: 3.93″)

#41012: Savage Round Back Short Action – 20 MOA – Silver (Center Spread: 3.93″)

#41018: Savage Round Back Muzzle Loader – 0 MOA – Black (Center Spread: 3.93″)

#41019: Savage Round Back Muzzle Loader – 0 MOA – Silver (Center Spread: 3.93″)

#41030: Savage Round Back Short Action with Ejection Port (Extended F-Class Rail) – 0 MOA – Black (Center Spread: 3.93″)

#41040: Savage Round Back Short Action Single Load (Extended F-Class Rail) – 0 MOA – Black (Center Spread: 3.93″)

#41100: Savage Round Back Long Action – 0 MOA – Black (Center Spread: 4.630″)

#41101: Savage Shortened 220 Slug Gun – 0 MOA – Black (Center Spread: 4.630″)

#41101-S: Savage Shortened 220 Slug Gun – 0 MOA – Silver (Center Spread: 4.630″)

#41102: Savage Round Back Long Action – 20 MOA – Black (Center Spread: 4.630″)

#41110: Savage Round Back Long Action – 0 MOA – Silver (Center Spread: 4.630″)

#41112: Savage Round Back Long Action – 20 MOA – Silver (Center Spread: 4.630″)

#41200: Savage Flat Back Short Action (older style savage without accu-trigger) – 0 MOA – Black (Center Spread: 3.930″)

#41202: Savage Flat Back Short Action (older style savage without accu-trigger) – 20 MOA – Black (Center Spread: 3.930″)

#41300: Savage Flat Back Medium Action (older style savage without accu-trigger) – 0 MOA – Black (Center Spread: 4.09″)

#41302: Savage Flat Back Medium Action (older style savage without accu-trigger) – 20 MOA – Black (Center Spread: 4.09″)

#41400: Savage Flat Back Long Action (older style savage without accu-trigger) – 0 MOA – Black (Center Spread: 4.630″)

#41402: Savage Flat Back Long Action (older style savage without accu-trigger) – 20 MOA – Black (Center Spread: 4.630″)

#41500: Savage Mk II (older style) with 1-3/8″ Ejection Port (will not fit newer MKII) – 0 MOA – Black (Center Spread: 3.345″)

#41502: Savage Mk II (older style) with 1-3/8″ Ejection Port (will not fit newer MKII) – 20 MOA – Black (Center Spread: 3.345″)

#41600: Savage 93 and newer Mk II with 1-5/8″ Ejection Port (will not fit older MKII) – 0 MOA – Black (Center Spread: 3.345″)

#41602: Savage 93 and newer Mk II with 1-5/8″ Ejection Port (will not fit older MKII) – 20 MOA – Black (Center Spread: 3.345″)

#41605: Savage 93 and newer Mk II with 1-5/8″ Ejection Port (will not fit older MKII) – 30 MOA – Black (Center Spread: 3.345″)

#41606: Savage 93 and newer Mk II with 1-5/8″ Ejection Port (will not fit older MKII) – 40 MOA – Black (Center Spread: 3.345″)

#41610: Savage 93 and newer Mk II with 1-5/8″ Ejection Port (will not fit older MKII) – 0 MOA – Silver (Center Spread: 3.345″)

#41700: Savage 210 – 0 MOA – Black (Center Spread: 3.659″)

#41720: Savage 212 – 0 MOA – Black (Center Spread: 4.629″)

#41800: Savage Edge, Axis, Axis II – 0 MOA – Black (Center Spread: 4.321″)

#41801: Savage Edge, Axis, Axis II – 0 MOA – Silver (Center Spread: 4.321″)

#41802: Savage Edge, Axis, Axis II – 20 MOA – Black (Center Spread: 4.321″)

#41803: Savage Edge, Axis, Axis II – 20 MOA – Silver (Center Spread: 4.321″)

#41900: Savage 64 (MUST DRILL AND TAP RECEIVER) – 0 MOA – Black (Center Spread: 3.345″)

#41920: Savage 25 – 0 MOA – Black (Center Spread: 3.987″)

#41950: Savage 42 – Black

#41960: Savage Rascal – Black (Center Spread: 1.884″)

#41970: Savage B Mag – 0 MOA – Black (Center Spread: 3.195″)

#41972: Savage B Mag – 20 MOA – Black (Center Spread: 3.195″)

#41980: Savage A17, A22 Magnum – 0 MOA – Black (Center Spread: 3.181″)

#41982: Savage A17, A22 Magnum – 20 MOA – Black (Center Spread: 3.181″)

#41983: Savage A22 22LR – 0 MOA – Black (Center Spread: 2.907″)

#41990: Savage B17, B22, B22LR – 0 MOA – Black (Center Spread: 3.050″)

#41992: Savage B17, B22, B22LR – 20 MOA – Black (Center Spread: 3.050″)

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW’s Australian Warranty.

Weight 0.101 kg
Part Number

#41000 Round, SA, 0 MOA, BLK, #41002 Round, SA, 20 MOA, BLK, #41010 Round, SA, 0 MOA, SIL, #41012 Round, SA, 20 MOA, SIL, #41018 Round, ML, 0 MOA, BLK, #41019 Round, ML, 0 MOA, SIL, #41030 RB SA Ex F-CL EP 0 MOA, #41040 RB SA Ex F-CL SL 0 MOA, #41100 Round, LA, 0 MOA, BLK, #41101 Short 220 SG, 0 MOA, BLK, #41101-S Short 220 SG 0 MOA SIL, #41102 Round, LA, 20 MOA, BLK, #41110 Round, LA, 0 MOA, SIL, #41112 Round, LA, 20 MOA, SIL, #41200 Flat, SA, 0 MOA, BLK, #41202 Flat, SA, 20 MOA, BLK, #41300 Flat, MA, 0 MOA, BLK, #41302 Flat, MA, 20 MOA, BLK, #41400 Flat, LA, 0 MOA, BLK, #41402 Flat, LA, 20 MOA, BLK, #41500 Old Mk II, 0 MOA, BLK, #41502 Old Mk II, 20 MOA, BLK, #41600 93 +Mk II, 0 MOA, BLK, #41602 93 +Mk II, 20 MOA BLK, #41605 93 +Mk II, 30 MOA, BLK, #41606 93 +Mk II, 40 MOA, BLK, #41610 93 +Mk II, 0 MOA SIL, #41700 Sav 210, 0 MOA, BLK, #41720 Sav 212, 0 MOA, BLK, #41800 Edge Axis, 0 MOA, BLK, #41801 Edge Axis, 0 MOA, SIL, #41802 Edge Axis, 20 MOA, BLK, #41803 Edge Axis, 20 MOA, SIL, #41900 Sav 64 D&T 0 MOA BLK, #41920 Sav 25, 0 MOA, BLK, #41950 Sav 42, BLK, #41960 Sav Rascal, BLK, #41970 Sav B Mag, 0 MOA, BLK, #41972 Sav B Mag 20 MOA BLK, #41980 A17 A22 Mg 0 MOA BLK, #41982 A17 A22 Mg 20 MOA BLK, #41983 A22, 0 MOA, BLK, #41990 B17, B22, 0 MOA, BLK, #41992 B17, B22, 20 MOA, BLK

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Product Enquiry

Shopping Cart
Scroll to Top