EGW Lightweight Tactical Picatinny Scope Mount Rail Base – Ruger

To fit Ruger firearms, please see our other listings for EGW rails to fit other manufacturers.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

• This mount is available with a 0 or 20 MOA (for most models)
• Mounting screws and allen wrench included
• This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.
• Made in the USA
• 6061 T6 Aircraft Grade Aluminium
• Most models available in Silver (SIL) or Black (BLK). Black models are Type 2 Anodized

Installation: EGW recommends 20 inch lbs of torque and a drop of blue loctite

NOTE: If you prefer to buy Australian Made, and are buying a Ruger American Rimfire rail to fit on a Howa M1100, we also manufacture our own scope rails for the Howa M1100. This is a perfect fit for the Howa, no misaligned ejection port or other issues you get when using the Ruger rail. Available at the following link: https://australiantacticalprecision.com.au/shop/optics/scope-bases-and-rails/?filtering=1&filter_product_brand=1705

We also make rails to fit the Ruger M77 which does not require any modification to your action. Available at the following link: https://australiantacticalprecision.com.au/product/optics/scope-bases-and-rails/atp-picatinny-scope-mount-rail-base-ruger-m77-m77-mkii-hawkeye-australian-made/

 

Notes:

#46101-U: This rail is undrilled so will require holes to be drilled (comes with #6 screws)

10-22 TAKEDOWN RAILS: This scope mount will fit the 10-22 and10-22 takedown and is lowered to allow for use of rear sight with mount mounted.

M77 RAILS: These rails are drilled for and include 8-40 screws, you must drill and tap your receiver to fit these rails.

*The center spread is the distance between the two middle holes, center to center, on your receiver.

Available for the following:

#46100: Ruger 10/22 – 0 MOA – Black (Center Spread: 2.57″)

#46101: Ruger 10/22 Takedown – 0 MOA – Black (Center Spread: 2.57″)

#46101-U: Ruger 10/22 Takedown – Undrilled – 0 MOA – Black

#46102: Ruger 10/22 – 20 MOA – Black (Center Spread: 2.57″)

#46103: Ruger 10/22 – 30 MOA – Black (Center Spread: 2.57″)

#46104: Ruger 10/22 – 40 MOA – Black (Center Spread: 2.57″)

#46110: Ruger 10/22 – 0 MOA – Silver (Center Spread: 2.57″)

#46111: Ruger 10/22 Takedown – 0 MOA – Silver (Center Spread: 2.57″)

#46112: Ruger 10/22 – 20 MOA – Silver (Center Spread: 2.57″)

#46120: Ruger M77 Long Action (MUST DRILL AND TAP RECEIVER) – 0 MOA – Black (Center Spread: 4.215″)

#46122: Ruger M77 Long Action (MUST DRILL AND TAP RECEIVER) – 20 MOA – Black (Center Spread: 4.215″)

#46140: Ruger M77 Short Action (MUST DRILL AND TAP RECEIVER) – 0 MOA – Black (Center Spread: 3.875″)

#46142: Ruger M77 Short Action (MUST DRILL AND TAP RECEIVER) – 20 MOA – Black (Center Spread: 3.875″)

#46150: Ruger American Short Action – 0 MOA – Black (Center Spread: 3.01″)

#46152: Ruger American Short Action – 20 MOA – Black (Center Spread: 3.01″)

#46160: Ruger American Long Action – 0 MOA – Black (Center Spread: 3.538″)

#46162: Ruger American Long Action – 20 MOA – Black (Center Spread: 3.538″)

#46170: Ruger American Rimfire – 0 MOA – Black (Center Spread: 2.513″)

#46172: Ruger American Rimfire – 20 MOA – Black (Center Spread: 2.513″)

#46173: Ruger American Rimfire – 30 MOA – Black (Center Spread: 2.513″)

#46174: Ruger American Rimfire – 40 MOA – Black (Center Spread: 2.513″)

ATP is an authorised Australian dealer for EGW. All EGW products bought from ATP are covered by EGW’s Australian Warranty.